Home > Chrome Pontiac Engine Parts > Pontiac combo kits > Pontiac factory height combos

MCC71375SB chrome pontiac 350 emblem valve cover and 350 emblem air cleaner factory height blue combo

Part Number MCC71375SB

MCC71375SB chrome pontiac 350 emblem valve cover and 350 emblem air cleaner factory height blue combo

MCC71375SB Chrome Factory Height Pontiac 350 Blue Emblem Valve Covers And Emblem Air Cleaner

Email a friend

Price

Your Price:

$118.99

Availability:

In Stock

Quantity

Description

MCC71375SB The Chrome Air Cleaner With Blue 350 Hi Performance Emblem

Air Cleaner Material	Steel , Triple Plated Copper / Nickel / Chrome
Size	MCC71B-3 Chrome 350 Air Cleaner Is 14 Inches In Diameter And 3 Inches Tall
Emblem	The Blue And Chrome Emblem On MCC71B-3 Chrome 350 Air Cleaner Is Approximately 1/8" Thick Nylon . Heat & Fuel Resistant . Adhered With Thermal Adhesive Then Baked On @ 260 Degrees
Air Cleaner	MCC71B-3 Chrome 350 Air Cleaner Comes With Recessed Base, Filter, Chrome Top And A Stud And Standard Wing Nut Taped Inside
Neck Size	MCC71B-3 Chrome 350 Air Cleaner Has A 5 1/8" Neck Size For Most Four Barrels, Two Barrel Adapters Are Available In The Air Cleaner Parts Category
Stud and wing nut	MCC71B-3 Chrome 350 Air Cleaner Comes With New Stud And Standard Wing Nut . Taped To The Inside Of Your New Air Cleaner When You Receive It.
Base	MCC71B-3 Chrome 350 Air Cleaner Comes With A Recessed Base. It Has A Total Height Of 3 Inches From The Carb Flange (Not Including Wing Nut). It Will Fit Holley, Demon & Quadrejet Carburetors. If You Are Running An Edelbrock Carburetor You Will Need To Use MCC150c 1/2 Riser To Clear The Fuel Line And/Or Choke Housing.
Restrictions	MCC71B-3 Chrome 350 Air Cleaner Is Designed For Carburetors With A 5 1/8 Neck Size If You Are Running An Original Two Barrel Check The Neck Size On Your Carburetor

MCC71375SB Pontiac 350 Chrome Factory Height Valve Covers With Blue 350 Hi Performance Emblems
Material	MCC75SB Chrome 350 Pontiac Factory Height Valve Covers Chrome Steel , Triple Plated Copper / Nickel / Chrome
Emblems	Approximately 1/8" Thick Nylon . Heat & Fuel Resistant . Adhered With Thermal Adhesive Then Baked On @ 260 degrees
Pair	MCC75SB Chrome 350 Pontiac Factory Height Valve Covers Price Is For A Set Of 2 Valve Covers
Engines	MCC75SB Valve Covers Fit Pontiac 350 Engines
Bolts Holes	MCC75SB Chrome 350 Pontiac Factory Height Valve Covers Have 4 Mounting Holes Per Valve Cover
Thickness	MCC75SB Chrome 350 Pontiac Factory Height Valve Covers Are Stamped From Approximately .042 Thick Steel.
Height	MCC75SB Chrome 350 Pontiac Factory Height Valve Covers Are 2 5/8 " Factory Height , Will Clear Factory Air Conditioning Brackets
Baffles	These Chrome Pontiac Valve Covers Come With Baffled Rubber Grommets Instead Of Built In Baffles
Gaskets	Do Not Come With Gaskets Any Quality Gasket Made For Your Engine Will Work With MCC75SB Valve Covers
Accessories	Valve Cover Accessories Do Not Come With The Valve Covers But Can Be Found In Our VALVE COVER PARTS Category. Each Valve Cover Has 4 Mounting Holes So You Will Need 8 Bolts / Spreaders When Ordering For This Set Note: Pontiac Engines Are 5/16 Bolt Size For Mounting Hardware
Restrictions	MCC75SB Chrome 350 Pontiac Factory Height Valve Covers Cannot Be Run On Engines With Roller Rockers.