|
Material
|
Chrome steel , triple plated Copper / Nickel / Chrome
|
|
Bolts
|
This Bracket DOES NOT come with mounting bolts
|
|
Thickness
|
Upper bracket is stamped from approximately .100 thick steel. The lower is made from approximately .230 thick steel
|
|
Mounting
|
The upper bracket mounts to the front of the intake and the mounting ear on the water pump
|
|
Length of mounting arm
|
Approximately 4 3/8 (slotted)
|
|
Waterpump
|
This bracket is for small block Chevrolet engines with long water pump and will mount the alternator on the passenger side of the engine just as the factory brackets do.
|
|
Application
|
For 1976 thru 1986 305 - 350 - 383 - 400 or any small block Chevy running a long water pump and 1976-1986 style intake manifold or aftermarket with factory mounting holes and accessories hole heads.
|
|
Restrictions
|
Cannot be run with race style intake such as Edelbrock victor Jr (use MCC576581) and cannot be used with "fuelie" or non accessories hole heads
|
|
Comments:
|
if you would like the same bracket without the fluted design use MCC579
If you have a long water pump bracket from 1969-1975 that mounts to the water neck bolt instead of the intake manifold use MCC0578
|
