-
Material :
Chrome steel , triple plated Copper /
Nickel / Chrome,
-
Thickness: These valve covers are stamped from
approximately .040 thick steel.
-
Application : Generally all Small Block Chevy's
from 1959 -1984
-
Restrictions
:Will not work on early 283's
with staggered bolt pattern or late model 1986 & up with
center bolt style valve covers
-
Valve Covers : This set is Tall
(approximately 3 1/2" tall) They WILL NOT clear factory air
conditioning brackets. Each valve cover has one hole in it
for accessories. They CAN
be run with aftermarket roller rockers if you would like
these valve covers in OEM stock height use MCC107S for the
short set.
-
Baffled : YES, these valve covers come with steel
baffles in each
-
Gaskets : NO, these do not come with gaskets, Any
Quality gasket made for the small block Chevy will work on
these valve covers
-
Valve Cover Accessories : Hold downs, breathers,
PCV valves etc. DO NOT come with the valve covers but can
be located on the left side links on this page and
purchased separately . Each valve cover has 4 mounting
holes so you will need 8, bolts or spreaders etc. when
ordering for this set
-
Installation tips : When tightening your valve cover
start on the low side and tighten in a cross pattern to
the correct torque spec . Do not over tighten the valve
covers when installing them!
-
Comments :
-
If you would like this
as a combo kit meaning valve cover and a 14 inch air
cleaner use MCC303107T
-
If you would like short
valve covers use part number
MCC107S
-
If you would like 2
-piece tall valve covers use MCC107T-2p
-
All MotorChrome part numbers
can be pulled up by typing the MCC# into the search box
