-
Material :
Chrome steel , triple plated Copper /
Nickel / Chrome,
-
Thickness: These valve covers are stamped from
approximately .042 thick steel.
-
Application : Generally all Big Block Chevy's
from 1965 - up 396 , 427, 454
-
Valve Covers : This set is a short
(approximately 2 1/4" tall) They WILL clear factory air
conditioning brackets. They CANNOT
be run with aftermarket roller rockers if you have roller
rockers use MCC108T for the tall set. Each valve cover has one hole in it for
accessories.
-
Baffled : YES, these valve covers come with steel
baffles in each
-
Gaskets : NO, these do not come with gaskets, Any
Quality gasket made for the big block Chevy will work on
these valve covers
-
Valve Cover Accessories : Hold downs, breathers,
PCV valves etc. DO NOT come with the valve covers but can
be located on the left side links on this page and
purchased separately . Each valve cover has 7 mounting
holes so you will need 14, bolts or spreaders etc. when
ordering for this set
-
Installation tips : When tightening your valve cover
start on the low side and tighten in a cross pattern to
the correct torque spec . Do not over tighten the valve
covers when installing them!
-
Comments :
-
If you would like tall valve covers part number
MCC108T
-
If you would like these
with red and chrome 454 hi performance emblems use
part number MCC95S
-
If you would like these
with
red and chrome
427 hi performance emblems use
part number MCC65S
-
If you would like these
with
red and chrome
396 hi performance emblems use
part number MCC67S
-
All MotorChrome part numbers
can be pulled up by typing the MCC# into the search box
