-
Material :
Chrome steel , triple plated Copper / Nickel / Chrome,
-
Thickness: These valve covers are stamped from approximately .039 thick steel.
-
Application : Generally all Big Block Mopars 361 / 383 / 440 from 1958 -1988
-
Valve Covers : This set is approximately 3 1/2" tall). Each valve cover has one hole in it for accessories.
-
Baffled : YES, these valve covers come with steel baffles in each
-
Gaskets : NO, these do not come with gaskets, Any Quality gasket made for the big block Mopar will work on these valve covers
-
Valve Cover Accessories : Hold downs, breathers, PCV valves etc. DO NOT come with the valve covers but can be located on the left side links on this page and purchased separately . Each valve cover has 6 mounting holes so you will need 12, bolts or spreaders etc. when ordering for this set
-
Installation tips : When tightening your valve cover start on the low side and tighten in a cross pattern to the correct torque spec . Do not over tighten the valve covers when installing them!
-
Comments :
-
if you would like this as a combo kit meaning the valve covers and a 14 X 3 inch air cleaner use part number MCC303111
-
if you would like these valve covers with 383 HP red and chrome emblems use part number MCC59
-
if you would like these valve covers with 440 magnum red and chrome emblems use part number MCC88
-
All MotorChrome part numbers can be pulled up by typing the MCC# into the search box
