-
Material :
Chrome steel , triple plated Copper /
Nickel / Chrome,
-
Thickness: These valve covers are stamped from
approximately .040 thick steel.
-
Application : Generally all Small Block Chevy's
from 1959 -1984
-
Valve Covers : This set is a short
(approximately 2 1/4" tall) They WILL clear factory air
conditioning brackets. One valve cover has one1
1/4" hole in it
for accessories. The other valve cover has one hole
1 1/4" and one for a twist in oil cap use mcc220 sold
separately They CANNOT
be run with aftermarket roller rockers
-
Baffled :
YES, these valve covers come with steel
baffles in each ( not in oil cap hole)
-
Gaskets : NO, these do not come with gaskets, Any
Quality gasket made for your small block Chevy will work on
these valve covers
-
Valve Cover Accessories :
Hold downs, breathers,
PCV valves, mcc220 etc. DO NOT come with the valve covers but can
be located on the left side links on this page and
purchased separately . Each valve cover has 4 mounting
holes so you will need 8, bolts or spreaders etc. when
ordering for this set
-
Restrictions
:Will NOT work on early 283's
with staggered bolt pattern or late model 1986 & up with
center bolt style valve covers
-
Installation tips : When tightening your valve cover
start on the low side and tighten in a cross pattern to
the correct torque spec . Do not over tighten the valve
covers when installing them!
-
Comments :
-
If you would like 3
hole short valve covers without the emblems use MCC94s
-
If you would like short
2 hole set of valve covers instead use part number MCC107S
-
If you would like tall
2 hole set of valve covers instead use part number MCC107T
-
All MotorChrome part numbers
can be pulled up by typing the MCC# into the search box
