Thickness : This part is stamped from
approximately .040 thick steel.
Tube & Stick :
YES both the tube and stick are included
Application : Oldsmobile Engines 350,
455 and Trans Am 6.6 liter 403 engines.
Length : 20 inches
Installation tips :
When installing your new
dipstick make sure the hole it is going into is clean and
free from debris Stick a short screw driver into the
dipstick hole of the tube and gently push the dipstick
into place, it is a compression fit so be sure the
dipstick is all the way into the block ,taking care not to
bend the tube upon installation. Do not force into the
block with a hammer!
Comments :
If you would like a billet and
chrome dipstick like this for your Oldsmobile engine use part number MCC9404
All MotorChrome part numbers
can be pulled up by typing the MCC# into the search box
