Chrome 351 Windsor and 351 Cleveland Ford HP Air Cleaner

Part #(MCC43-3) Close up pic of emblem Installation tips: Be sure to install the stud into your carburetor and check your hood clearance to the stud before closing the hood to avoid damaging your hood. If necessary cut the stud to the correct height and reinstall. Air Cleaner Material  Steel , triple plated Copper / Nickel / Chrome Size MCC43-3 Chrome 351 Windsor , 351 Cleveland & M air cleaner is 14 inches in diameter and 3 inches tall Emblems Approximately 1/8" thick Nylon . Heat & fuel resistant . Adhered with thermal adhesive then baked on @ 260 degrees Air Cleaner Comes with recessed base, filter, chrome top  and a stud and standard wing nut taped inside Neck Size MCC43-3 chrome 351 Windsor , 351 Cleveland & M air cleaner has a 5 1/8" neck size for most four barrels, two barrel adapters are available in the air cleaner parts category Stud and wing nut MCC43-3 chrome 351 Windsor , 351 Cleveland & M air cleaner comes with new stud and standard wing nut . Taped to the inside of your air cleaner when you receive it.  Base MCC43-3 chrome 351 Windsor , 351 Cleveland & M Hi Performance air cleaner comes with a recessed base. It has a total height of 3" from the carb flange (not including wing nut). It will fit Holley, Demon & Quadrejet carburetors. If you are running an Edelbrock carburetor you will need to use MCC150c 1/2 riser to clear the fuel line and/or choke housing. Restrictions Designed for carburetors with a 5 1/8 neck size if you are running an original two barrel check the neck  size on your carburetor Click On these related items to view them