|
Material
|
Chrome steel , triple plated Copper / Nickel / Chrome
|
|
Bolts
|
This Bracket DOES NOT come with mounting bolts
|
|
Thickness
|
Upper bracket is stamped from approximately 5/16 thick steel.
|
|
Mounting on small block
|
This bracket mounts to the two lower power steering mounting holes on the drivers side of the engine on small block Chevy applications NOTE: make sure your vehicle has the room to mount the alternator in this location ( most common problem would be contact with the K member on some cars)
|
|
Mounting on big block
|
This bracket mounts with one bolt in the lower bolt hole in the cylinder head on the drivers side of the engine and one in the upper hole located in the block mounting the alternator at approximately the header height on Big Block Chevy applications NOTE: make sure your vehicle has the room to mount the alternator in this location
|
|
Waterpump
|
This bracket is for small & big block Chevrolet engines with short water pump and will mount the alternator on the drivers side of the engine .
|
|
Application
|
Small and Big Block Chevrolet engines using a short water pump and not running power steering
|
|
Restrictions
|
Cannot be run with power steering & cannot be run on long water pump applications NOTE: This bracket has a small amount of adjustment compared to other alternator brackets be sure to measure for your new belt length correctly
|
|
Comments:
|
If you would like a traditional style alternator bracket for short water pump Big block Chevy use part # MCC562 and MCC564
If you would like a traditional style alternator bracket for short water pump Small block Chevy use part # MCC565 , MCC568 , or MCC569 in conjunction with, MCC566 and MCC567
|
