| Air Cleaner Material |
Steel , triple plated Copper / Nickel / Chrome |
| Size |
MCC47388 air cleaner is 14 inches in diameter and 3 inches tall |
|
Air Cleaner
|
MCC47388 Comes with the air cleaner that has a recessed base, filter, chrome top and a stud and standard wing nut taped inside |
| Emblems |
Approximately 1/8" thick Nylon. Heat & fuel resistant . Adhered with thermal adhesive then baked @ 260 degrees |
|
Neck Size
|
MCC47388 has a 5 1/8" air cleaner fits most four barrels, two barrel adapters are available in the air cleaner accessories category |
|
Air Cleaner Base
|
MCC47388 comes with a recessed base air cleaner. It has a total height of 3" from the carb flange (not including wing nut). It will fit Holley, Demon & Quadrejet carburetors. If you are running an Edelbrock carburetor you will need to use MCC150c 1/2 riser to clear the fuel line
|
|
Restrictions
|
The Air Cleaner is designed for carburetors WILL NOT work on fuel injection
|
| Valve Covers |
Steel , triple plated Copper / Nickel / Chrome |
| Thickness |
MCC47388 Chrome Mopar 440 valve covers are stamped from approximately .042 thick steel. |
| Pair |
MCC47388 comes with a set of 2 Chrome Mopar 440 valve covers |
| Height |
MCC47388 comes with factory height Chrome Mopar 440 valve covers. Each valve cover has one hole in it for accessories. |
| Baffled |
YES, these Chrome Mopar 440 valve covers come with steel baffles |
| Gaskets |
NO, these do not come with gaskets. Any Quality gasket made for your engine will work on these Chrome Mopar 440 valve covers |
| Valve Cover Accessories |
Valve Cover Accessories Do Not come with the Chrome Mopar 440 valve covers and are sold separately. They can be located on the left side links on this page or at the bottom of this page in the related items. Each valve cover has 6 mounting holes so you will need 12 bolts or spreaders when ordering for this set |
|
Restrictions
|
Chrome Mopar 440 valve covers Will Not work on engines running aftermarket roller rockers |
