 
(MCC60206030) Polished
Aluminum Ball milled
Small Block Chevy Air Cleaner & Tall Valve Cover Combo Set

Specifications for
(MCC60206030)
,
Neck Size : 5 1/8" fits most four barrels, two barrel
adapters are available in the air cleaner accessories
category
Stud :
Comes with 1/4 x 20 taped flush mount air cleaner stud
Base
:
This air cleaners base has a 1/2 inch extension the total
height of the air cleaner from the carb is 3 inches
including the stud.
Air Filter :
12 x 2 paper element, so when
you need to replace we carry replacement filters
MCC6020E, if you would like to add a K&N filter to your
order it is MCC3505
Application :
Small Block Chevy 327, 350 , 383 , 400
engines
Installation tips :
Be sure to install the stud
into your carburetor and check your hood clearance to the
air cleaner before closing the hood to avoid damaging your hood
.
Valve Covers : This set is
factory height
(approximately 3 1/2" tall) They will NOT clear
factory air conditioning brackets. Each valve cover has
one hole in it for accessories. They CAN
be run with most aftermarket roller rockers
Baffled :
YES, these valve covers come with steel
baffles for each
Gaskets : NO, these do not come with gaskets, Any
Quality gasket made for the Small Block Chevy will work on
these valve covers
Valve Cover Accessories :
Hold downs, breathers,
PCV valves etc. DO NOT come with the valve covers but can
be located on the left side links on this page and
purchased separately . Each valve cover has 4 mounting
holes so you will need 8, bolts or spreaders etc. when
ordering for this set
Installation tips : When tightening your valve cover
start on the low side and tighten in a cross pattern to
the correct torque spec . Do not over tighten the valve
covers when installing them!
Comments :
If you would like Just the
valve covers use MCC6030
If you would like Just the air cleaner use MCC6020
All MotorChrome part numbers
can be pulled up by typing the MCC# into the search box
|