-
Material :
Chrome steel , triple plated Copper / Nickel / Chrome,
-
Thickness : These valve covers are stamped from approximately .040 thick steel.
-
Application : Pontiac 400 engines from 1959 -1979
-
Valve Covers : This set is a Tall
(approximately 3 1/2" tall) set of valve covers . Each valve cover has one 1 1/4" hole in it for accessories. Valve cover accessories sold separately. They CANNOT be run with factory a/c . They CAN be run with most aftermarket roller rockers
-
Baffled : YES, these valve covers come with steel baffles in each ( not in oil cap hole)
-
Gaskets : NO, these do not come with gaskets, Any Quality gasket made for your Pontiac engine will work on these valve covers
-
Valve Cover Accessories : Hold downs, breathers, PCV valves, c. DO NOT come with the valve covers but can be located on the left side links on this page and purchased separately . Each valve cover has 4 mounting holes so you will need 8, bolts or spreaders etc. when ordering for this set Note: Pontiac engines have 5/16 mounting hardware so be sure to get 5/16 not 1/4
-
Installation tips :
When tightening your valve cover start on the low side and tighten in a cross pattern to the correct torque spec . Do not over tighten the valve covers when installing them!
-
Comments :
-
if you would like a this set of valve covers with red and chrome emblems use part number MCC60TR
-
If you would like Combo kit meaning valve covers & air cleaner for 400 Pontiac instead use part number MCC61360TB for blue and MCC61360TR for red
-
if you would like a plain chrome set of valve covers use part number MCC110T
-
All MotorChrome part numbers can be pulled up by typing the MCC# into the search box
