(MCC69SR) Small Block Chevy 350 HP Emblem Short Valve Covers

close up pic of Emblem

Specifications for (MCC69SR)

• Material : Chrome steel , triple plated Copper / Nickel / Chrome, With Phenolic Plastic Emblems.

• Emblems : approximately 1/8" thick  and are ,heat and fuel resistant .They are adhered with a thermal adhesive then baked @ 260 degrees to set the emblem in place and cannot be removed without damaging them

• Thickness :  These valve covers are stamped from approximately .040 thick steel.

• Application :  Small Block Chevy' 350 engines

• Restrictions : Will not work on early 283's with staggered bolt pattern heads or late model 1986 & up with center bolt style heads

• Valve Covers : This set is factory height (approximately 2 1/2" tall) They WILL NOT clear factory air conditioning brackets. Each valve cover has one hole in it for accessories. They CAN  be run with aftermarket roller rockers

• Baffled : YES, these valve covers come with steel baffles in each

• Gaskets : NO, these do not come with gaskets, Any Quality gasket made for the small block Chevy will work on these valve covers

• Valve Cover Accessories : Hold downs, breathers, PCV valves etc. DO NOT come with the valve covers but can be located on the left side links on this page and purchased separately . Each valve cover has 4 mounting holes so you will need 8, bolts or spreaders etc. when ordering for this set

• Installation tips : When tightening your valve cover start on the low side and tighten in a cross pattern to the correct torque spec . Do not over tighten the valve covers when installing them!

• Comments :

• If you would like tall valve covers with red and chrome use part number MCC69TR

• If you would like plain chrome valve covers without emblems use part number MCC107T

• All  MotorChrome part numbers can be pulled up by typing the MCC# into the search box