Close pic up of emblem

Specifications for (MCC74B)

Material :Chrome Steel, triple plated Copper / Nickel / Chrome

Pair : The Price is for 2 valve covers

Thickness :  These valve covers are stamped from approximately .040 thick steel.

Application : Generally all Oldsmobile engines from 1964 -1988 with 10 valve cover mounting holes per valve cover

Valve Covers : This set is a stock height set of valve covers . Each valve cover has one 1 1/4" hole in it for accessories.  Valve cover accessories sold separately They cannot be run with most aftermarket roller rockers

Baffled : YES, these valve covers come with steel baffles in each ( not in oil cap hole)

Gaskets : NO, these do not come with gaskets, Any Quality gasket made for your Olds engines will work on these valve covers

Valve Cover Accessories : Hold downs, breathers, PCV valves, c. DO NOT come with the valve covers but can be located on the left side links on this page and purchased separately . Each valve cover has 10 mounting holes so you will need 20, bolts or spreaders etc. when ordering for this set

Restrictions : Will NOT work on later model 5 mounting bolt heads( ours are 10 per side)

Installation tips : When tightening your valve cover start on the low side and tighten in a cross pattern to the correct torque spec . Do not over tighten the valve covers when installing them!

Comments :

If you would like Combo kit meaning valve covers & air cleaner  for 350 olds instead use part number MCC71374B for blue emblems and MCC71374R for red emblems

if you would like a plain chrome set of valve covers instead use part number MCC122

All MotorChrome part numbers can be pulled up by typing the MCC# into the search box