Material : Chrome steel , triple plated Copper / Nickel / Chrome,
Thickness : These valve covers are stamped from approximately .040 thick steel.
Application : 350 Pontiac engines from 1959 -1979
Valve Covers : This set is a tall (approximately 3 1/2" ) set of valve covers . Each valve cover has one 1 1/4" hole in it for accessories. Valve cover accessories sold separately. They CANNOT be run with factory a/c . They CAN be run with most aftermarket roller rockers
Baffled : YES, these valve covers come with steel baffles in each
Gaskets : NO, these do not come with gaskets, Any Quality gasket made for your Pontiac engines will work on these valve covers
Valve Cover Accessories : Hold downs, breathers, PCV valves, c. DO NOT come with the valve covers but can be located on the left side links on this page and purchased separately . Each valve cover has 4 mounting holes so you will need 8, bolts or spreaders etc. when ordering for this set Note: Pontiac engines have 5/16 mounting hardware so be sure to get 5/16 not 1/4
Installation tips : When tightening your valve cover start on the low side and tighten in a cross pattern to the correct torque spec . Do not over tighten the valve covers when installing them!
Comments :
If you would like Combo kit meaning valve covers & air cleaner for 350 Pontiac instead use part number MCC71375TB for blue and 71375TR for red
if you would like a plain chrome set of valve covers use part number MCC110T
All MotorChrome part numbers can be pulled up by typing the MCC# into the search box
