|
Specifications for Part Number (MCC7310)
|
|
Material
|
Stainless steel ,with Polished Aluminum hose ends
|
|
Thickness
|
These hoses are made from from approximately .033 thick corrugated stainless steel.
|
|
Hose Sizes
|
This kit comes with 48" of hose that will be cut (Can be cut with a hacksaw or equivalent ) into two hoses one for the upper and one for the lower. It comes with 4 polished aluminum hose ends and sleeves for 4 - 1 3/4 , 4 - 1 1/2 , 4 - 1 1/4 hose diameters. It also comes with all the hose clamps necessary to install.
|
|
Buying Tips
|
Before purchase measure your hoses and hose diameters to verify this will fit your application (48 inches of hose is plenty to due most any muscle car)
|
|
Application
|
Generally all Muscle car engines
|
|
Restrictions
|
Cannot be run with outlets larger than 1 3/4 inches or smaller than 1 1/4
|
|
Installation tips: Put a small amount of RTV silicone on to the corrugated ends of the hoses after cutting to length .Install the hose end covers onto the hoses and then the rubber sleeves. Clamp the sleeve to the hose and to the water outlet with the provided hose clamps .Installing the clamps sleeves and covers simultaneously for each outlet .Do not over tighten the clamps when installing them!
|
