Close pic up of emblem

Specifications for (MCC95s)

Pair : The Price is for 2 valve covers

Emblems : approximately 1/8" thick  and are ,heat and fuel resistant .They are adhered with a thermal adhesive then baked @ 260 degrees to set the emblem in place and cannot be removed without damaging them

Thickness :  These valve covers are stamped from approximately .040 thick steel.

Application :  Chevrolet 454 engines 

Valve Covers : This set is factory height (approximately 2 1/2" tall) set of valve covers . Each valve cover has one 1 1/4" hole in it for accessories.  Valve cover accessories sold separately. They CAN be run with factory a/c . They CANNOT be run with most aftermarket roller rockers

Baffled : YES, these valve covers come with steel baffles in each

Gaskets : NO, these do not come with gaskets, Any Quality gasket made for your Pontiac engines will work on these valve covers

Valve Cover Accessories : Hold downs, breathers, PCV valves, etc. DO NOT come with the valve covers but can be located on the left side links on this page and purchased separately . Each valve cover has 7 mounting holes so you will need 14, bolts or spreaders etc. when ordering for this set

Installation tips : When tightening your valve cover start on the low side and tighten in a cross pattern to the correct torque spec . Do not over tighten the valve covers when installing them!

Comments :

If you would like Combo kit meaning valve covers & air cleaner for 454 Chevy instead use part number MCC10595s

if you would like a plain chrome set of valve covers use part number MCC108s

All MotorChrome part numbers can be pulled up by typing the MCC# into the search box